151 Dalton Street Orange, NSW, 2800 Australia
Register |  Login   |   Quote Cart

Taubmans Easy Coat Pro Matt White 4L

$0.00 (Inc. GST)
$0.00 (Ex. GST)
(No reviews yet) Write a Review
SKU:
32060
More Information:
For more information follow this link:- PPG PAINT
Taubmans Easy Coat Pro Matt White 4L

Click for an Online Quote

Do you need us to quote you on products for your job or project? Or would you like to place an order for fibre cement, timber, decking, hardware or adhesives or building materials? Just fill in this form and we will get a quote confirmation back to you fast.

GET A QUOTE NOW

Preparation and Directions
Surfaces must be clean, dry and free from all surface contamination. Treat mould with bleach then rinse with fresh water. Fill in the surface defects with suitable filler, putty or sealant. Avoid using masking tape on wall and ceiling paints.

New Work
Paper Faced Plasterboard, Fibre Cement, Masonry & Timber ‰ÛÒ Apply one coat of Taubmans Easycoat Prep Sealer/Primer/Undercoat.
Plaster ‰ÛÒ Seal with one coat of Taubmans PrepRight Plaster Sealer.

Previously Painted Surfaces
Remove all loose and flaking paint by scraping or sanding previously painted areas and sand smooth.

  • After removing wallpaper, wash off all paste residue and apply one coat of Taubmans PrepRight Traditional Oil Based Undercoat.
  • Undercoat previously painted enamel surfaces with Taubmans 3 in 1 to promote intercoat adhesion.
  • Spot prime bare areas in accordance with directions for new work.

Application
Apply two coats by roller or brush. Paint the corners and edges with a narrow brush and roll up to the edges using a 10mm (length of nap or pile) roller.

  • Stir paint in a circular lifting motion for 5 minutes before use
  • Drying time: 30 minutes (touch dry)
  • Recoat: 2 hours at 25å¡C (allow 4 hours in cold or humid areas)
  • Do not paint at temperatures below 10å¡C

Coverage
Up to 16må_ per litre. Coverage will be lower on rough or absorbent surfaces.


Call us